
What moves the price of a sprinkler repair
Reviewed by Adam Hurlbert, Owner & Founder, 15+ years in landscape & property care
A sprinkler repair is priced on three things: how long it takes to find the fault, how much digging the fix needs, and which parts have failed. A clogged nozzle and a mainline leak under a driveway are both "a sprinkler repair", and they are very different jobs. Here are the factors that move the price, so you can read an estimate and compare two of them fairly.
Why is finding the problem often the biggest part?
Because the symptom and the cause are often in different places. A dry patch can be a sunken head, a clogged nozzle, low pressure on the zone, or a leak upstream. A zone that will not start is much more often a failed solenoid or a corroded wire splice than the controller everyone blames first. Finding which one takes running each zone, checking coverage and pressure, and testing at the valve. A company that diagnoses properly may spend more time before it picks up a shovel, but it usually spends less in total, because it fixes the right thing once.
Are heads and nozzles the cheap part?
Usually. Heads that are sunken, tilted, clogged or broken are the most common fault and the simplest fix, since each one is a small dig and a standard part. The U.S. EPA's WaterSense program suggests looking for heads that do not pop up fully or are tilted. The cost adds up when there are many of them, when they are an older or discontinued model, or when a whole zone needs re-heading so the spray patterns match.
What about valves, solenoids and wiring?
A valve that will not open, or will not close, is usually a solenoid or a diaphragm problem, and the valve box makes it reachable. Wiring is where the time goes. A break or a corroded splice in buried wire has to be traced, and if the wire was run without a map, that can take a while. A zone that runs by itself or will not shut off is often debris in the valve.
How much do leaks vary?
More than any other repair. A leak at a head or a lateral fitting under lawn is a small, quick job. A leak in the mainline, which holds pressure whenever the supply is on, can mean more water, more digging and a harder search. The EPA notes that water pooling on the surface between cycles may point to an underground leak, and that leaks often form at the joints between sprinklers and pipe. Where the leak is matters as much as what it is: under open lawn is one thing, under a patio, a driveway or a mature tree's roots is another. We locate the leak before we dig.
Does freeze damage cost more?
It can, because one hard freeze on a system that was not cleared tends to damage several things at once: split pipe, cracked fittings, broken valve bodies and the backflow preventer. Most of it is found at spring startup. Colorado State University Extension notes that leaving the backflow preventer's valves half open over winter helps keep it from freezing and splitting. A proper fall blowout is the cheapest way to avoid this whole category of repair; see blow out your own sprinklers, or hire it out.
Why does backflow work add a step?
Repairing or replacing a backflow preventer brings a required test with it in Missoula. The water utility's program requires assemblies to be tested by a certified backflow assembly tester at least once a year and immediately after installation, relocation or repair, with a report sent to Missoula Water. So a backflow repair usually means coordinating a tester as well as doing the repair. We are not a certified tester, so we work with yours. Ask any repair estimate whether the retest is included or separate.
What if the parts are no longer made?
Older systems often have heads, valves or controllers that are discontinued. Sometimes a compatible part fits; sometimes the fix is to retrofit a section, such as a manifold of valves, so future repairs use current parts. That costs more on the day and less over time. A good estimate tells you which situation you are in and gives you the choice.
How do access and the finished surface change it?
Digging in open lawn is quick and the sod goes back. Digging through rock, under pavers, beside a foundation or through a planted bed takes longer and costs more to put back. The estimate should say whether restoring the surface is included.
Does fixing several things at once help?
Often. Much of the cost of a repair visit is the diagnosis and the trip, so a list of faults found at spring startup is usually cheaper to fix in one visit than one at a time through the summer. If many faults keep appearing, it may be time to ask whether to repair the sprinkler system or replace it.
Does the time of year matter?
Somewhat. Spring startup is when most faults show up at once, so it is also when repair schedules are fullest. A fault found in midsummer is usually cheaper to fix sooner, before a dry zone damages the lawn or a leak runs up the water bill. Late fall is a poor time for anything that needs digging and new sod, so non-urgent repairs found at the blowout are often best listed and done at startup.
Why are there no prices on this page?
Because two repairs that sound the same can be very different jobs, and we will not publish a figure we cannot stand behind for your system. Tell us what the system is doing, and the estimate for the fix will be based on what the diagnosis finds on your system.
How should you compare two repair estimates?
Check whether diagnosis is included or billed separately, whether the estimate names the fault and the part for each item, whether restoring the lawn or surface is included, and whether any backflow repair includes the retest. Two estimates that agree on the fault are comparable. Two that disagree on the fault are telling you something about the diagnosis. Our guide to what should be in a yard care quote covers the rest, and the Montana Property Care Guide covers the whole property.
When you are ready, see our sprinkler repair service, book a repair visit, or call HJ Property Care & Tree Service at (406) 215-7319.
Need help?
HJ Property Care & Tree Service is locally owned and ISA-certified. Call for a free estimate.
This article is part of the Montana Landscaping, Lawn & Irrigation Guide, our complete guide for western Montana property owners.
Explore our irrigation systems.
Sources
We cite primary sources: Montana State University Extension, the City of Missoula, and the ISA, so you can verify anything here yourself.
- Sprinkler Spruce-Up (U.S. EPA WaterSense). Last checked November 11, 2026.
- Public Works Standards Manual Appendix 4-A, Cross-Connection/Backflow Protection Program (City of Missoula / Missoula Water). Last checked November 11, 2026.
- Home Sprinkler Systems: Preparing Your Sprinkler System for Winter (Colorado State University Extension). Last checked November 11, 2026.
Ready to transform your outdoor space?
Get a free, no-obligation estimate within 48 hours. Locally owned and ISA-certified.
